Trends in automotive research [electronic resource] : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia / edited by Shahrum Abdullah [and others].
ISBN:
9783038137405
Title:
Trends in automotive research [electronic resource] : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia / edited by Shahrum Abdullah [and others].
Author:
Regional Conference on Automotive Research (2011 : Kuala Lumpur, Malaysia)
Conference Author:
Publication Information:
Durnten-Zurich : Trans Tech Publications, 2012.
Physical Description:
1 online resource (1 volume) : illustrations.
Series:
Applied mechanics and materials ; v. 165
Local Note:
eBooks on EBSCOhost
Subject Term:
Added Author:
Format:
Electronic Resources
Electronic Access:
Click here to view
Publication Date:
2012
Publication Information:
Durnten-Zurich : Trans Tech Publications, 2012.
Available:*
Shelf Number | Material Type | Copy | Shelf Location | Status |
---|---|---|---|---|
629.231 23 | 1:E-BOOK | 1 | 1:ONLINE | Searching... Unknown |
Bound With These Titles
On Order
Summary
Summary
This special issue of Trends in Automotive Research contains papers contributed to the Regional Conference on Automotive Research (ReCAR) , held on the 14 and 15th December, 2011, in Kuala Lumpur, Malaysia. The conference was organised by the Centre for Automotive Research (CAR), Faculty of Engineering and the Built Environment, Universiti Kebangsaan Malaysia.Volume is indexed by Thomson Reuters CPCI-S (WoS).
Table of Contents
Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia | p. 1 |
Effect of Retrogression Medium to the Mechanical Properties of Aluminum Alloy 7075 | p. 6 |
Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs) | p. 12 |
Prediction of Fatigue Crack Propagation of Rail Material Using 2D Finite Element Modeling | p. 16 |
Whole Body Vibrations Exposure to Malaysian Driver Using Novel IKaz Method | p. 21 |
Fatigue Life Assessment of Aluminium Alloy 6061 Specimen Using Signal Analysis Approach for Automotive Components | p. 26 |
Effect of Intake Manifold Angle of Port-Fuel Injection Retrofit-Kit to the Performances of an S.I. Engine | p. 31 |
New In-Wheel Electric Motor Design for Small Electric Vehicle Using Opera2D | p. 38 |
Experimental and Numerical Analysis of Lift and Drag Force of Sedan Car Spoiler | p. 43 |
Power Analysis of Light Electric Vehicles Using Fundamental Calculations | p. 48 |
Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines | p. 53 |
Effects of Pad Surface Topography on Disc Brake Squeal | p. 58 |
Automotive Noise Insulation Composite Panel Using Natural Fibres with Different Perforation Areas | p. 63 |
Structural Modification of Disc Brake Judder Using Finite Element Analysis | p. 68 |
Design and Development of Simple Control System for Small Hybrid Electric Vehicle | p. 73 |
Corrosion Effect on Car Welded Jointed in Terms of Sea Environment Effect | p. 78 |
Experimental and Analytical Durability Assessment of SAE 1045 Steel under Service Loadings | p. 83 |
Microstructural Characterization of ZrO2 Layer Coating on Martensitic Stainless Steel | p. 88 |
Accurate Prediction of Springback in Forming of BIW Parts | p. 93 |
New Concept for Reducing Wire-Harness and Implementing Advanced Facilities for Non-Luxury Vehicles via Application of POF | p. 98 |
MFI Zeolite Membrane from Rice Husk for Biofuels Production | p. 104 |
Verification of 14DOF Full Vehicle Model Based on Steering Wheel Input | p. 109 |
Mathematical Model of Eco-Driving for Energy Optimization for Electric Vehicle | p. 114 |
Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Fueled with Gasoline and CNG | p. 120 |
Development of 2D Image Capture Method Software for Recognizing Drivers' Postural Angles | p. 125 |
Impact Response of Thin-Walled Tubes: A Prospective Review | p. 130 |
Characterisation of the Sound and Vibration Signal of Impact Testing on Automotive Component Materials | p. 135 |
A Study on Validation of Fatigue Damage Clustering Analysis Technique Based on Clustering Validation Index | p. 140 |
Experimental Study of an Internal Heat Exchanger Influence on R134a Automobile Air Conditioning System | p. 145 |
Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle | p. 150 |
Nonlinear State Estimation of Tire-Road Contact Forces Using a 14 DoF Vehicle Model | p. 155 |
Experimental Investigation on the Effect of Container Geometry Change to Liquid Sloshing | p. 160 |
Noise, Vibration and Harshness (NVH) Study on Malaysian Armed Forces (MAF) Tactical Vehicle | p. 165 |
Vehicle Speed Control Using Gain Scheduling PID Controller | p. 170 |
Wet Sump Design for a FSAE Racing Car | p. 175 |
Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens | p. 182 |
Sensitivity of Modeling in Sheet Metal Three-Point Cyclic Bending | p. 187 |
Modelling, Simulation and Validation of 9 DOF Vehicles Model for Automatic Steering System | p. 192 |
Vibration Analysis of Blocked Circular Pipe Flow | p. 197 |
Design and Development of UTeM Perodua Eco-Challenge Vehicle | p. 202 |
Analysis on Impact Performance of Aluminum Automotive Side Member | p. 209 |
Modelling of a Twin-Track Vehicle Model with Modular Wheel Suspensions | p. 214 |
Elevated Temperature Fatigue Fracture Behaviour of Aluminium Alloy Subjected to Spectrum Loadings | p. 219 |
Automotive Ecosystem in Malaysia - A Conceptual Model to Explain Vehicle Ownership and Car Maintenance Issues | p. 224 |
Feature Selection for Fatigue Segment Classification System Using Elitist Non-Dominated Sorting in Genetic Algorithm | p. 232 |
Novel Design of Impact Attenuator for an 'Eco Challenge' Car | p. 237 |
A Comparative Study on the Effect of Air Gap on Sound Transmission Loss Provided by Double Glazed Panels | p. 242 |
Impact Performance of Low Carbon Steel Safety Beams for Car Doors | p. 247 |
Review on the Application of Driving Simulators for Research and Training Activities in Malaysia | p. 252 |
Car Body and Chassis Development of UKM CARevo for Perodua Eco-Challenge 2011 | p. 260 |
Determination of Leg Injury Criteria Subjected to Frontal Impacts | p. 265 |
Performance of Hood System and Head Injury Criteria Subjected to Frontal Impacts | p. 270 |
Introducing Fatigue Contour Plot in LS-Pre Post LSDYNA Finite Element Crash Simulation Software | p. 275 |
Performance of Aluminium Alloy Side Door Subjected to Pole Impact Test | p. 280 |
Ductile Failure Prediction of Spot Welded Lap Joint | p. 285 |
Quality Improvement in Three-Way Catalytic Converter (TWC) System Using Failure Mode and Effect Analysis (FMEA) Methodology | p. 290 |
Effect of Load Carriage on the Backpack Vibration System | p. 295 |
Effects of Rim and Web Thicknesses on Root Stresses of Thin-Rimmed Helical Gear | p. 300 |
A Study on Alternative Fuel Blending for Homogeneous Charge Compression Ignition (HCCI) Engine Using Palm Oil Methyl Ester and RON 97 | p. 305 |
Evaluation of Different Control Policies of Semi-Active MR Fluid Damper of a Quarter-Car Model | p. 310 |
Evaluation of Driver's Pre-Driving Skill on a Driving Simulator Using the Intelligent Dynamic Event Classifier (IDEA) Approach | p. 316 |
Design of Special Purpose off Road Vehicle (SPORV) for Unmanned Ground Vehicle Application | p. 323 |
Quantification of Field of View and Blind Zone Reduction for Safe Driving | p. 330 |
Simulation of Effect of Solder Balls Layout on Warpage and Interfacial Stresses of FBGA | p. 334 |
Damage Mechanics Model for Fracture Process of Steel-Concrete Composite Slabs | p. 339 |
Low Velocity Impact Induced Delamination Control Using MFC Actuator | p. 346 |
Select a list
The following items were successfully added.
There was an error while adding the following items. Please try again.
One or more items could not be added because you are not logged in.