![Cover image for Applied Mechanics, Materials and Manufacturing IV [electronic resource] : Selected, Peer Reviewed Papers from the 4th International Conference on Applied Mechanics, Materials and Manufacturing (ICA3M 2014, ICAMMM 2014), August 23-24, 2014, Shenzhen, China](/client/assets/5.1326/ctx//client/images/no_image.png "Cover image for Applied Mechanics, Materials and Manufacturing IV [electronic resource] : Selected, Peer Reviewed Papers from the 4th International Conference on Applied Mechanics, Materials and Manufacturing (ICA3M 2014, ICAMMM 2014), August 23-24, 2014, Shenzhen, China")
Applied Mechanics, Materials and Manufacturing IV [electronic resource] : Selected, Peer Reviewed Papers from the 4th International Conference on Applied Mechanics, Materials and Manufacturing (ICA3M 2014, ICAMMM 2014), August 23-24, 2014, Shenzhen, China
ISBN:
9783038266723
Title:
Applied Mechanics, Materials and Manufacturing IV [electronic resource] : Selected, Peer Reviewed Papers from the 4th International Conference on Applied Mechanics, Materials and Manufacturing (ICA3M 2014, ICAMMM 2014), August 23-24, 2014, Shenzhen, China
Author:
Liu, Huawu.
Personal Author:
Publication Information:
Zurich : Trans Tech Publishers, 2014.
Physical Description:
1 online resource (1710 p.)
Series:
Applied Mechanics and Materials ; v.670-671
Applied Mechanics and Materials
General Note:
Description based upon print version of record.
Contents:
Applied Mechanics, Materials and Manufacturing IV; Preface and Conference Organization; Table of Contents; Chapter 1: Nanomaterials Science and Technology; The Function of PEG in the Synthesis of Nanomaterials; Typical Solid State and Wet Chemistry Methods to Prepare Nano-Sized Nickel Ferrite Particles; Robust Design of Using MWCNTs in Minimum Quantity Lubrication; Synthesis of TiO2@Ag Nano-Composite Particles Using Pulsed Laser Gas Phase Evaporation-Liquid Collection; The Synthesis and Characterization of Oxide Free Tin Nanoparticles; Chapter 2: Metals and Alloys
Hot Deformation Behavior and Microstructure Evolution of Extruded 6069 Al Alloy under TensionStudy of N-1L Corrosion of Carbon Steel in Acidic Desulfurizer Performance; Surface Crack and Organization of Hot Rolled S31803 Duplex Stainless Steel Bars; Comparison Research on Mechanical Properties of High Temperature Alloy after Laser Peened and Ultrasonically Peened; Effect of Laser Shock Peening on the Structure and Prosperity of K403 Alloy; Effects of Different Heat Treatments on Transformation of Residual Austenite in Bearing Steel
Influence of Ultrasonic Treatment on Welded Joint Fatigue Performance in JG590 SteelMicrostructures and Properties of HAZ of JB800 Bainite Steel; Study on the Corrosion Electrochemical Behaviors of Three Kinds of Metal in Eutrophic Fresh Water; The Effect of Water Vapor on Thermal Oxide Grown on Inconel 690; Investigation of Material Behavior of TRIP Steel by Macro and Micro Multiscale Simulation; Critical Cooling Rate of Y36Nd20Al24Co20 Bulk Amorphous Alloy
Predicting the Influence of Microporosity on the Mechanical Properties and Fracture Behavior of High-Pressure Die-Cast AM50 Magnesium AlloyResearch on Hardness for Low-Alloy Steel after Fire Damage; Chapter 3: Optical and Magnetic Materials, Semiconductors and Technology; Study on Band Gap Varying of Diamond Photonic Crystals by Fabricating to Bring the Error of Dielectric Volume Fraction; Wide Absolute-Photonic-Bandgap 2D Square-Lattice Photonic Crystal Based on Hollow Cylinders and Cross Connecting Plates
A Two-Dimensional Square-Lattice Photonic Crystal with Rotated Square Cylinders and Cross Thin Plates Exhibiting Wide Photonic BandgapComparative Studies of Multiferroic BiFeO3 Powders Prepared by Hydrothermal Method versus Sol-Gel Process; Growth of Mo Thin Films on Flexible Polymer and Metal Foil Substrates for Solar Cell Application; High Permittivity and Varistor Properties of SnO2-Zn2SnO4 Composite Ceramics; Preparation and Application of Grapheme; Chapter 4: Composite Materials and Applications
A Study of Linear versus Kinked Bulky Polymers for Proton Exchange Membranes Using Sulfonated Polyimides
Format:
Electronic Resources
Electronic Access:
Click here to view book
Publication Date:
2014
Publication Information:
Zurich : Trans Tech Publishers, 2014.
Available:*
Shelf Number | Material Type | Copy | Shelf Location | Status |
|---|---|---|---|---|
| 621 | 1:E-BOOK | 1 | 1:ON-DEMAND | Searching... Unknown |
Bound With These Titles
On Order
Summary
Summary
Collection of selected, peer reviewed papers from the 4th International Conference on Applied Mechanics, Materials and Manufacturing (ICA3M 2014, ICAMMM2014), August 23-24, 2014, Shenzhen, China. Volume is indexed by Thomson Reuters CPCI-S (WoS).The 336 papers are grouped as follows: Chapter 1: Nanomaterials Science and Technology; Chapter 2: Metals and Alloys; Chapter 3: Optical and Magnetic Materials, Semiconductors and Technology; Chapter 4: Composite Materials and Applications;Chapter 5: Chemical Materials and Technologies for Chemical Engineering; Chapter 6: Building Materials and Construction Technology; Chapter 7: Technologies of Material Processing;Chapter 8: Applied and Computational Mechanics in Designing and Research; Chapter 9: Industrial Equipment and Technology;Chapter 10: Mechanical Structural Strength, Reliability and Risk Analysis and Assessment;Chapter 11: Vibration, Sound, Noise Analysis and Control; Chapter 12: Measurement Technology, Instruments and Sensors, Monitoring, Detection Technologies and Methodologies; Chapter 13: Mechatronics, Industrial Robots, Automation and Control Technologies; Chapter 14: Electronics, Circuit Technology and Electrics; Chapter 15: Computer Applications and Mathematical Modeling, Intelligent Algorithms and Optimization; Chapter 16: Industrial Engineering, Production Management, Operations, Quality and Control;Chapter 17: New Technologies in Engineering Education
Table of Contents
| The Function of PEG in the Synthesis of Nanomaterials | p. 3 |
| Typical Solid State and Wet Chemistry Methods to Prepare Nano-Sized Nickel Ferrite Particles | p. 7 |
| Robust Design of Using MWCNTs in Minimum Quantity Lubrication | p. 11 |
| Synthesis of TiO2@Ag Nano-Composite Particles Using Pulsed Laser Gas Phase Evaporation-Liquid Collection | p. 22 |
| The Synthesis and Characterization of Oxide Free Tin Nanoparticles | p. 26 |
| Hot Deformation Behavior and Microstructure Evolution of Extruded 6069 Al Alloy under Tension | p. 33 |
| Study of N-1L Corrosion of Carbon Steel in Acidic Desulfurizer Performance | p. 37 |
| Surface Crack and Organization of Hot Rolled S31803 Duplex Stainless Steel Bars | p. 41 |
| Comparison Research on Mechanical Properties of High Temperature Alloy after Laser Peened and Ultrasonically Peened | p. 46 |
| Effect of Laser Shock Peening on the Structure and Prosperity of K403 Alloy | p. 52 |
| Effects of Different Heat Treatments on Transformation of Residual Austenite in Bearing Steel | p. 56 |
| Influence of Ultrasonic Treatment on Welded Joint Fatigue Performance in JG590 Steel | p. 61 |
| Microstructures and Properties of HAZ of JB800 Bainite Steel | p. 65 |
| Study on the Corrosion Electrochemical Behaviors of Three Kinds of Metal in Eutrophic Fresh Water | p. 70 |
| The Effect of Water Vapor on Thermal Oxide Grown on Inconel 690 | p. 74 |
| Investigation of Material Behavior of TRIP Steel by Macro and Micro Multiscale Simulation | p. 82 |
| Critical Cooling Rate of Y36Nd20Al24Co20 Bulk Amorphous Alloy | p. 86 |
| Predicting the Influence of Microporosity on the Mechanical Properties and Fracture Behavior of High-Pressure Die-Cast AM50 Magnesium Alloy | p. 90 |
| Research on Hardness for Low-Alloy Steel after Fire Damage | p. 95 |
| Study on Band Gap Varying of Diamond Photonic Crystals by Fabricating to Bring the Error of Dielectric Volume Fraction | p. 101 |
| Wide Absolute-Photonic-Bandgap 2D Square-Lattice Photonic Crystal Based on Hollow Cylinders and Cross Connecting Plates | p. 105 |
| A Two-Dimensional Square-Lattice Photonic Crystal with Rotated Square Cylinders and Cross Thin Plates Exhibiting Wide Photonic Bandgap | p. 109 |
| Comparative Studies of Multiferroic BiFeO3 Powders Prepared by Hydrothermal Method versus Sol-Gel Process | p. 113 |
| Growth of Mo Thin Films on Flexible Polymer and Metal Foil Substrates for Solar Cell Application | p. 117 |
| High Permittivity and Varistor Properties of SnO2-Zn2SnO4 Composite Ceramics | p. 121 |
| Preparation and Application of Grapheme | p. 127 |
| A Study of Linear versus Kinked Bulky Polymers for Proton Exchange Membranes Using Sulfonated Polyimides | p. 133 |
| Characterisation of Low-Temperature Co-Firable Green Tapes for Making Fused Silica Laminated Composites | p. 137 |
| Study on Thermal Stability Properties of Epoxy Matrix/Fluorine and Silicon Composites | p. 143 |
| Synthesis and Characterization of Polyacrylic Acid/Xanthan Gum/Bentonite Superabsorbent Polymer | p. 148 |
| Thermal Strength of Adhesion Bond | p. 153 |
| Effect of Fiber Orientation on Vibration Characteristic of Composite Laminated Plates | p. 158 |
| Preparation of the Carbon Fiber/Cu Alloy Matrix Self-Lubricating Composite Materials | p. 164 |
| Mechanical Properties of Automotive Instrument Panels with Semi-Rigid Foam | p. 168 |
| Study on Transverse Shear Behavior of CFRP Sandwich Structure with M-Pattern Folded Core | p. 173 |
| The Outdoor Aging Properties of Polypropylene/Mica Composite | p. 177 |
| The Utilization Efficiency of Natural Alumosilicates in Composite Binders | p. 182 |
| A Comparative Study on Silica Sands as Absorbents for the Removal of Hexavalent Chromium Ions from Aqueous Solutions | p. 189 |
| Diversity of Cell Wall Composition and Saccharides Production with H2SO4 Pretreatment in Bioenergy Material: Miscanthus | p. 193 |
| Dyeing of Mulberry Silk Using Natural Safflower Yellow Pigment | p. 197 |
| Effect of Heat Treatment Process on the Preparation of Foamed Glass Ceramic from Red Mud and Fly Ash | p. 201 |
| Effect of Heating Rate on the Deinking Sludge Pyrolysis Character | p. 205 |
| Laboratory Permeation Tests of PS for Solidification of Relic Soils in Humid Circumstances | p. 209 |
| Structural Analysis of Lignin and its Thermal Performance under Supercritical Water Conditions | p. 213 |
| Study on ELISA Plates Modified with Methylacrylic Acid by 60Co Irradiation | p. 219 |
| Synthesis and Preparation of Desulfurization Concerned Naphthenic Acid Type Ionic Liquid | p. 224 |
| Use of Adsorbents for Indoor Air Purification from Carbon Dioxide | p. 229 |
| Vibrationally Averaged Potential Energy Surfaces and Microwave Spectra for Isotopic Ne-CO2 Complexes | p. 235 |
| Optimization of Sodium Carbonate Pretreatment on Enzymatic Digestibility of Bioenergy Material: Miscanthus | p. 240 |
| Polymerization of Maleic Anhydride Induced by Non-Equilibrium Atmospheric Pressure Argon Plasma | p. 244 |
| Mechanorphore-Based Poly(Glycidyl Methacrylate) Synthesized by Atom Transfer Living Radical Polymerization | p. 249 |
| PCBs Removing in Aged Landfill Leachate by an Innovative Biofilm Reactor with Biomass Carriers - Luffa Sponges | p. 253 |
| Research of Coal Pores and Integrity Evaluation Method Based on Fractal Theory | p. 258 |
| Synthesis and Dielectric Behavior of a New Two-Phase Percolative BaTiO3-Cu/Polyimide Composite | p. 263 |
| Immobilization of Laccase on Surface Modified Magnetic Silica Particles and its Use for the Papermaking Wastewater | p. 267 |
| Microstructure and Corrosion Resistance of TiO2 Films on 316L Using Hydrothermal Method | p. 271 |
| Preparation Process and Mechanism of CuO-MnO2-TiO2-V2O5 in the Metallic Luster Glaze | p. 275 |
| Functions of SiO2-Shells in Core-Shell Structured Particles | p. 279 |
| Development of Metallurgical Processing Technology the Titanomagnetite Concentrate of the Tebinbulak Deposit | p. 283 |
| Research on Efficient Polymer Dissolving Technology for Hydrophobically Associating Polymer Flooding on Offshore Platform | p. 290 |
| Research of Coalbed Methane Fracturing Crack Initiation and Propagation Law | p. 295 |
| Research of Aluminosilicate Refractorial Erosion Process on the HCL in Blast Furnace Gas | p. 300 |
| Dyeing of Bamboo Viscose Fiber with Gardenia Yellow and Sodium Copper Chlorophyll | p. 305 |
| The Effect Nucleating Agent on Open-Celled Morphology of Polymer in Vibration | p. 309 |
| Technical Research for Oil Well Variable Frequency Electromagnetic Field Paraffin Prevention | p. 313 |
| The Preparation Process and Mechanism of the Iron-Red Fancy Glaze under High Temperature Reducing Atmosphere | p. 318 |
| Large-Scale Growth of Nitrogen-Doped via Solvothermal Synthesis | p. 323 |
| Application of Organosilicone and Gyoxal Crosslinking Agents on Tussah Silk Fabric | p. 327 |
| Effects of High Added Quantity SSA-SSP-GSP on Resistance to Carbonation of Concrete | p. 333 |
| Evaluation the Strength of Cement Systems, Modified by Accelerators | p. 339 |
| Experimental Study on Seismic Performance of AAS-CFST Column | p. 344 |
| Humidity Conditions of Homogeneous Wall from Gas-Concrete Blocks with Finishing Plaster Compounds | p. 349 |
| Mathematical Modelling of Thermo-Hydro-Mechanical Behaviour for Concrete under Elevated Temperature | p. 355 |
| Nonstationary Thermal Conduction through the Building Envelope | p. 365 |
| Performance of Acrylic in the Large Architectural Installation | p. 370 |
| Research on the Effect of Prehydration of Portland Cement Stored in Normal Conditions | p. 376 |
| The Research on the Hysteresis Curve Shape Characteristics of Frozen Soil | p. 382 |
| Experimental Study on Comparison about the Modifiers of Rubber Cement Concrete | p. 387 |
| Mechanism Research of Drying Shrinkage of Cement Pastes Based on the Contact Angle | p. 391 |
| Study on Tension and Compression Ratio and Discount Ratio of Rubber Modified Silica Fume Concrete | p. 396 |
| The Conventional Triaxial Compressive Test of Plain Reactive Powder Concrete | p. 401 |
| Influence of Several Calcareous Compounds on the Performance of Sulphoaluminate Cement Paste | p. 407 |
| Kinetics of Mechanical Activation during the Manufacturing Process of Nanostructured Binders | p. 412 |
| The Structure Design of Continuously Reinforced Concrete Pavement in Shi Ji Road | p. 417 |
| The Enhancement Effect of Hydrated Lime on Glassphalt Concrete | p. 423 |
| Deformation Characteristics of Concrete under Uniaxial Compression | p. 428 |
| Experimental Study on Evolution of Rock Damage Rule in the Condition of Conventional Three Axis Compression | p. 432 |
| Influence of Silica Fume on High-Performance Concrete | p. 437 |
| Research on Mechanism of Concrete Creep | p. 441 |
| Research Status of Concrete Strength Theory Based on Stress and Strain | p. 445 |
| Study on the Cooling Effect of Zeolite Powder to High Viscosity Asphalt Mixture | p. 449 |
| The Eco-Concrete with the Papermaking Sludge | p. 454 |
| Energy-Efficient Vibratory Feeder of Bulk Construction Materials | p. 458 |
| About Application Prospectivity of Rocks with Different Geological and Morphological Features as Basic Raw Component for Free-Cement Binder Production | p. 462 |
| Influence Analysis of Cold Formed Steel Members on Thermal Characteristics of Building Envelopes | p. 466 |
| The Research Reviewed of Subway Construction Impact on Stratum Deformation Law | p. 474 |
| A Multi-Functional Resistance Furnace for Industrial Thermogravimetric Analysis | p. 481 |
| Analysis for Transverse Knurling Process of the Assembled Camshaft | p. 485 |
| Cutting Tool Run out Considered Cutting Force Estimation in Micro Milling Processes | p. 490 |
| Development and Application of Test Apparatus for Cutting Performance of Cutters of Large Excavation Equipment | p. 497 |
| Effect of Different Machining Parameters on Time-Dependent Flatness | p. 502 |
| Effect of Temperature on the Mechanical Property of the Film-Substrate Interface of Diamond Coatings | p. 506 |
| Fabrication of Microstructure on Nickel Template by Femtosecond Laser | p. 512 |
| Flank Wear Mechanism of WC-5TiC-10Co Cemented Carbides Inserts when Machining HT250 Gray Cast Iron | p. 517 |
| Groove Deformation on a Heat Resistant Alloy due to Thermal and Thermo-Mechanical Cycling | p. 522 |
| Mirror Grinding Process Parameter Selection and Design | p. 526 |
| Monitoring and Analysis of the Process of Conductive Heating Turning | p. 529 |
| Performance of a Waterproof Glass-Ceramic Coating | p. 535 |
| Research on the High Temperature Oxidation Stress of Thermal Barrier Coating | p. 539 |
| Simulation of Grinding Surface Roughness by End Face Grinding Wheel with Phyllotactic Abrasive Pattern | p. 543 |
| Surrogate Modeling and Optimizing for CCP Etch Process | p. 548 |
| Microstructures and Wear Resistance of Iron-Based Protective Coatings by Supersonic Arc Spraying | p. 554 |
| Influences of Pulse Frequency on Structure and Mechanical Properties of DLC Films Synthesized by Pulsed Cathodic Arc Evaporation | p. 560 |
| Research on Compound Forming of Outside 3D Integral Fin on Stainless Steel Tube | p. 565 |
| Research on Surface Treatment Technologies of Ti6Al4V Alloys | p. 569 |
| Corrosion Properties of Friction Stir Welded 2024 Aluminum Alloys | p. 573 |
| Research on Electrode Design and Computer Simulation of Manufacturing Shrouded Turbine Blisk by EDM | p. 577 |
| Uniaxial and Biaxial Tensile Properties and Resilience of a Weft Knitted Modal Fabric | p. 582 |
| Diameter Real-Time Computing of Uncoiler/Coiler Machines Based on the S7-300 | p. 586 |
| Preparation and Performance of Crack-Free Silica Film on Glass Substrate | p. 592 |
| A Study on Solving the Seepage Flow Model of Three-Area Composite Reservoir | p. 599 |
| Aerodynamic Analysis of the Rotor/Wing in Conversion Flight | p. 604 |
| Aerodynamic Characteristics of an Airfoil with Boundary Layer Ingestion in Subsonic Flow | p. 609 |
| Comparative Numerical Simulation of Natural Convection in a Porous Horizontal Cylindrical Annulus | p. 613 |
| Conformal Invariance and Conserved Quantity of Mei Symmetry for Appell Equations in a Holonomic System with Mass Variable | p. 617 |
| Control Problems for the MHD Equations under Inhomogeneous Mixed Boundary Conditions | p. 626 |
| Effect of Wall Thickness of Hollow Sphere on the Stress Distribution of Random Hollow Sphere Syntactic Foam | p. 630 |
| Equilateral Triangle Grid Cylindrical Shell Parametric Design | p. 634 |
| Fault Analysis of Journal Bearing Considering the Turbulent and Thermo-Hydrodynamic Effects | p. 638 |
| Finite Poroelasticity with Surface Effect | p. 646 |
| High Arch Dam Reservoir Basin Deformation & Effect on Dam Operating Status | p. 651 |
| Hydrocyclone Numerical Simulation and Separation Efficiency Optimization | p. 655 |
| Immersed Boundary Lattice Boltzmann Method to Simulate Fluid Flows with Flexible Boundaries | p. 659 |
| Influence of Cylindrical Inclusion on the Elastic Field of Soft Material Loaded by Wedge Indenter | p. 664 |
| Numerical Investigation of the Minimum Roof Thickness of Mining Stope in Bailing Copper-Zinc Mine | p. 668 |
| Numerical Simulation of Groundwater Flow in Strata with Argillation Weak Permeable Media in Long Deep Buried Tunnel Site | p. 674 |
| Similar Constructive Method of Solution for the Nonlinear Percolation Model in Composite Reservoir | p. 678 |
| Sliding Mode Control for Spacecraft Large Angel Attitude Control with Fuel Sloshing | p. 683 |
| Square Pyramid Partial Double Layer of Schwedler Spherical Reticulated Shell Parametric Design and Mechanical Analysis | p. 687 |
| Superficial Discussion on New Framework of Static Equilibrium | p. 691 |
| The Establishment of Ninety Degree Gas Elbow Pipes Internal Pressure Distribution Model | p. 696 |
| The Influence of the Flight Aerodynamic for Interactions of Wings and Body of the Honeybee | p. 700 |
| The Influence of Upstream Flow Angle Variation on Intermediate Turbine Duct | p. 705 |
| Establishment and Simulation of Nonlinear Dynamic Model of Finished Automobile | p. 709 |
| Falling Simulation of Free-Standing Museum Cultural Relics Supported by Soft Pad | p. 715 |
| Modified Wavelet-Based Multilevel Discrete-Continual Finite Element Method for Local Structural Analysis - Part 1: Continual and Discrete-Continual Formulations of the Problems | p. 720 |
| Modified Wavelet-Based Multilevel Discrete-Continual Finite Element Method for Local Structural Analysis - Part 2: Reduced Formulations of the Problems in Haar Basis | p. 724 |
| Research on Horizontal Well Hydraulic Fracture Crack Initiation Law of Low Permeability Reservoir | p. 728 |
| Identifying Real Stiffness Properties of Structural Elements of Adapted Finite-Element Models of Buildings and Structures - Part 1: Problem Setting | p. 732 |
| Identifying Real Stiffness Properties of Structural Elements of Adapted Finite-Element Models of Buildings and Structures - Part 2: Computational-Experimental Methodology | p. 736 |
| Identifying Real Stiffness Properties of Structural Elements of Adapted Finite-Element Models of Buildings and Structures - Part 3: Approbation of Experimental Methodology | p. 742 |
| Numerical Simulation for Flow over Two Circular Cylinders in Micro Channel with Lattice Boltzmann Method | p. 747 |
| Study on Vortex Evolution Processes of Transient Driven Flow in a Square Cavity | p. 751 |
| The Segment Loading Static Finite Element Analysis on the Mobile Refuge Chamber | p. 755 |
| The Buckling Analysis of Drill String in Inclined Wellbore with a Concave Curved Geometric Defect | p. 759 |
| Calculation of Long Span Structures to Seismic and Accidental Impacts in Nonlinear Dynamic Formulation | p. 764 |
| Numerical Investigation of Stator Blades Bow Effect on the Rotor Blade Erosion of a Wet Steam Turbine | p. 769 |
| Numerical Study of Single-Mode Interface Shape on Rotary Motion Instability | p. 774 |
| Static Analysis of the Sub-Frame Based on Precision Load | p. 779 |
| Torque and Stress Characteristics of the Skewed-Roller Slipping Clutch Considering Frictional Contact and Dynamic Equilibrium | p. 784 |
| The Movement Precision Analysis of Planar Four-Bar Mechanism with Joint Clearance | p. 790 |
| Dynamical Study of a Structure: The Case of Al Hoceima's Earthquake / Morocco | p. 794 |
| Research on Time-Domain Dynamic Response of Tension Leg Platform in Regular Wave | p. 801 |
| Determination of Settling Velocity of Suspended Sediment in Estuary | p. 805 |
| Analysis on the Selection of Tooth Number for Closed Differential Planetary Gear Transmission Mechanism and Software Development | p. 809 |
| Optimization Design of Rapid-Cooling Mixer of By-Pass System of Cement Production Based on CFD | p. 814 |
| Research on the Chassis of Aircraft Recovery Trailer Based on ANSYS | p. 819 |
| Numerical Study on the Ballistic Impact on Lightweight Composite Armour | p. 824 |
| Structure Design of Manipulator for Pot Seedling Transplanter and Simulation Analysis | p. 829 |
| Study on Flexible Spin-Up Maneuver with Variable Cross-Section Based on Positional FEM | p. 834 |
| Numerical Investigation on Resistance Reducing Effect by Mass Injection through Porous Wall | p. 838 |
| A Dynamic Simulation Design of a Ladder Fire Truck Based on ADAMS | p. 843 |
| Redesign of a Reverse Shoulder Prosthesis: Kinematic and Mechanical Study | p. 847 |
| Strength Analysis of Epoxy Molding Compound Module Using Automated FEA System | p. 852 |
| Analysis of Sealing Properties of Coupled Gas Film Flow Field and Cantilever-Type Foil Deformation | p. 856 |
| Effect of Surface Topography on Average Film Thickness between the End Faces for Mechanical Seal | p. 860 |
| Numerical Analysis of Sewing Air Floating Needle Bar Based on Slit Type Guide Rail | p. 866 |
| The Performance Analysis and Parallel Optimization of the OpenFOAM-Based Viscoelastic Solver for Heterogeneous HPC Platforms | p. 873 |
| A Novel RBF Tuning Strategy for Global Surrogate Modeling | p. 881 |
| Optimal Design of a Hydraulic Suspension Mechanism of Aircraft Recovery Vehicle | p. 886 |
| Comparison of Static and Dynamic Analysis on KJYF96/8 Mobile Refuge Chamber | p. 892 |
| The Impact of Assembly on the Results of Modal Analysis | p. 896 |
| A New ESO-Based Method to Find the Optimal Topology of Structures Subject to Multiple Load Conditions | p. 902 |
| Study on the Ground Settlement Regularity Caused by Deep Caving Method | p. 907 |
| Analysis for the Large Precise Equipment Assembly | p. 915 |
| Application of Water-Lubricated Bearings in Motorized Centrifugal Air Compressor for Fuel Cell Automotives | p. 920 |
| Design Analysis of Dock Apron Skidway Blocks | p. 924 |
| Design of Sealing Structure and Analysis of the Flow Field in Micro Internal Combustion Swing Engine | p. 930 |
| Micro-Scale Manufacture of 3D Printing | p. 936 |
| Research on the Application of Adjustable Disc Type Nozzle Valve on Wellhead | p. 942 |
| The Design of Children's Multi-Function Carts Based on the Man-Machine Research | p. 946 |
| ANN Based Rare Earth Lifting Permanent Magnetic Chuck Design | p. 950 |
| Design and Manufacture of Composite CNG Cylinders | p. 955 |
| Green Ecological Design Research of Tourism Product Packaging | p. 960 |
| Comparative Exploration of Mini Vertical Axis Breeze-Driven Generator | p. 964 |
| Development and Design of Cold Radiation Refrigeration Energy Saving Technology of Comfort Air Conditioning | p. 968 |
| New Method of Increasing Working Volume of a Certain Type of Hydraulic Accumulator | p. 972 |
| A Reflective Display Technology Based on Electrofluidics | p. 976 |
| CFD Study on the Factors Influencing the Performance of PV-Integrated Double-Skin Fac#807;ade Channel | p. 982 |
| Lightweight of Aluminum Alloy Bumper Based on High-Speed Crash Component Test | p. 987 |
| The Research and Application of Vertical Wells Multilayer Fracturing Technology | p. 997 |
| Thermal Control Design for the Combination of Star Sensor Using C-C Graphite Material | p. 1003 |
| Experiment Analysis about Mechanical Properties of Rubber Bushing for Suspension Telescopic Shock Absorber | p. 1008 |
| Breakdown Process of Pseudospark Discharge Using the Various Discharge Module | p. 1012 |
| Effects of Groundwater Heat Pump Systems on the Temperature and Quality of Groundwater in Recharged Aquifer | p. 1016 |
| Study on Size Selections of the Ten-Needle Inline Nozzle Structure | p. 1023 |
| Frequency Reliability Sensitivity Analysis for Rotor System with Random Parameters | p. 1029 |
| Global Performance Estimation Based on Gaussian Mixture Model for Wind Turbines | p. 1033 |
| Study on Ball Screw Accuracy Reliability under Radial Force | p. 1037 |
| A New Approach for Determining Joint Stiffness of Bolted Joints | p. 1041 |
| The Critical Equipment Selection Used Criticality Analysis in Factory | p. 1045 |
| Relationship Study between Bolt Shape and Anchor Performance | p. 1050 |
| Study on Pretension Loss of Cables Applied in Mine | p. 1055 |
| A Continuum Damage Mechanics Approach for Fatigue Life Prediction of Open-Hole Metallic Plate | p. 1060 |
| Application of EWK and Modified X-W Fracture Models to Load-Bearing Lug Joints | p. 1068 |
| Rehabilitation of Cracked RC-Brick Masonry Wall with Opening by BFRP Composite Material | p. 1073 |
| Numerical Simulation Analysis of Tailings Dam Heightening Expansion Stability | p. 1079 |
| Creep-Fatigue Life Prediction for Aeroengine's High Temperature Component | p. 1083 |
| The Finite Element Research of Fatigue Properties of Steel Q345 Butt Welded Joint | p. 1087 |
| Acoustic Cloaking with Realizable Mass | p. 1093 |
| Optimization of Sound Package for Automotive Dash Panel | p. 1098 |
| Automotive Floor Sound Package Design Using Statistical Energy Analysis | p. 1102 |
| Composite Damping Circular Saw Blade Vibration Characteristics Analysis | p. 1106 |
| Coupling Vibration Research of a Turbine Blade-Disc System with Symmetric-Acyclic Structure | p. 1112 |
| Finite Element Analysis of Wind Vibration Control Effect for Single Transmission Tower | p. 1116 |
| Simulation on Vibration Characteristics of Throat and its Timbre | p. 1121 |
| Study of Wind Induced Vibration of Transmission Power Tower-Line System | p. 1125 |
| Vibration Characteristics of Violin Bow String and its Timbre Effect | p. 1130 |
| Seismic Analysis for Axial Fan Used in Nuclear Power Plant | p. 1134 |
| Study on Mechanical State Diagnosis of Power Transformer Winding Based on Vibration Method | p. 1140 |
| Analysis of a Seismic Performance on K8 Triangular Cone Partial Double Layer Spherical Reticulated Shell | p. 1145 |
| A Flextensional Transducer Prototype with PVDF Piezoelectric Film | p. 1153 |
| A Low Noise Power Design for Electrical Impedance Tomography System | p. 1159 |
| A Sensitive Formaldehyde Sensor Based on Cataluminescence Coupled with Thermal Desorption | p. 1163 |
| Inverse Identification of Nonlinear Boundary for a Pile Using Time Domain Multi-Point Approximations Method | p. 1167 |
| Method on Fault Detection and Diagnosis for Track Circuit Based on Main Rail Voltage | p. 1172 |
| Power System Fault Diagnosis Method Summary | p. 1179 |
| Random Sampling Approaches for Implementation of FPGA in Signal Processing | p. 1184 |
| Research on Measuring Methods on Explosion Seismic Waves | p. 1188 |
| Study on Volumetric Tool Wear Measurement Using Image Processing | p. 1194 |
| Underdetermined Blind Separation for Bearings Faults Based on the Improved Morphological Filter | p. 1200 |
| A PXI-Based Biomedical Electrical Impedance Tomography System | p. 1205 |
| Air Quality Condition Assessment Based on Point Check and Benchmark | p. 1210 |
| Design of Capacitance Probe Sensor in Deep Hole Diameter Measurement | p. 1214 |
| Embedded Smart Textile Detecting Equipment Base on Flexibility Sensors | p. 1218 |
| Research on Cotton Row Detection Algorithm Based on Binocular Vision | p. 1222 |
| Study of On-Line Monitoring Device for SF6 Humidity | p. 1228 |
| The Study on Broad Directivity Characteristic of Piston Transducer with Finite Baffle | p. 1233 |
| Development of On-Line Monitoring System for Large Rotating Machinery under Complex Circumstance | p. 1238 |
| Improving the SNR of SWD Data by Adjusting the Impact Energy of Drilling Tools | p. 1242 |
| Uncertainty Analysis for Static Balance Measurement of Hollow Be Rotor | p. 1247 |
| An Effective Independence-Improved Modal Strain Energy Method for Optimal Sensor Placement of Bridge Structures | p. 1252 |
| Development of a Wearable Biosensor System for Ubiquitous Healthcare Applications | p. 1256 |
| The Measurement Technique of Blind Hole Based on Capacitive Probe Sensor | p. 1260 |
| Accurate Measurement and Digital Modelling of Complex Surface | p. 1264 |
| Research of Material On-Line Identification Based on Terahertz Spectrum | p. 1269 |
| New Monitoring System of the Refractory Lining Wear in the Blast Furnace Hearth | p. 1274 |
| Roundness Error Evaluation Based on Differential Evolution Algorithm | p. 1285 |
| Stiffness Detection of Silicon Arm Based on Micro-Loading Method | p. 1290 |
| The Study on Optimum Thickness of Thermocouple Used for Measuring the Grinding Temperatures of Brittle Materials | p. 1296 |
| Single-User Cyclic Spectrum Detector Design in Cognitive Radio | p. 1301 |
| Analysis and Experimental Verification on Bias Drift of Silicon Microgyroscope | p. 1305 |
| Vibration Analysis of Silicon Microgyroscope Based on Simulink | p. 1310 |
| A Kind of Small Quadcopter | p. 1317 |
| A Method of Nonlinear Modal Superposition for Weakly Nonlinear Autonomous Systems | p. 1321 |
| Binocular Vision Sensor (Kinect)-Based Pedestrian Following Mobile Robot | p. 1326 |
| Control Method for Vehicles on Base of Natural Energy Recovery | p. 1330 |
| Control System Research of Square Steel Tube Straightening Machine | p. 1337 |
| LRF-Based Human Following Robot by Tracking Legs | p. 1342 |
| Performance Characteristics and Practice of Small Cylinder Crochet Galloon Machine | p. 1346 |
| The Analysis of Multi-Rotor Attitude Simulator Based on Matlab | p. 1350 |
| Output Switching Control of a Class of Time-Delay Fuzzy Systems | p. 1358 |
| Robust Control of a Class of Uncertain Fuzzy Systems | p. 1362 |
| Structural Module Partition and Fault Diagnosis of Nuclear Electric Valve Based on Function Analysis | p. 1366 |
| Autonomous Underwater Vehicle Motion Planning via Sampling Based Model Predictive Control | p. 1370 |
| A Nonlinear PID Controller with a Tracking Differentiator in the High Precision Servo System | p. 1378 |
| A Novel Design of Manipulator Arm Control System Based on STM32 | p. 1385 |
| A Tracked Robot for Complex Environment Detecting | p. 1389 |
| Gait Analysis and Simulation for a Three-Arm Robot | p. 1393 |
| The Analysis of Static Pose Error for a Multi-Joint Climbing Robot | p. 1397 |
| The Study of Compensation Method to Numerically-Controlled Machine Tool Geometrical Error | p. 1403 |
| Design and Implementation of a Rehabilitation Training Control System for Stroke Patients | p. 1406 |
| A Method of Height Adjustment for Unpowered Emergency Landing | p. 1410 |
| Mechanical Structure Design and Application for PCB Detection System | p. 1416 |
| Study of Machine Tool Selection Based on Fuzzy Comprehensive Evaluation | p. 1421 |
| Development of a Piezoelectric Micropump with Novel Separable Design | p. 1426 |
| Study of a Novel Power Distribution System Oscillation Model Based on Multi-Agent System | p. 1430 |
| Hybrid Flow-Shop Scheduling Method and Simulation Based on Adaptive Genetic Algorithm | p. 1434 |
| An Advanced Verification Platform Based on UVM | p. 1441 |
| Simulation and Analysis of DDR3 Bus Based on Fly-By Topology with Cadence | p. 1447 |
| Some Questions about Equivalent Circuit Synthesis and Nonlinear Electrical Circuit Implementation with the Specified Properties in the Electronic Simulation Tasks | p. 1454 |
| Study of Circuit Breaker Status Evaluating Model Based on Matter-Element Theory | p. 1458 |
| The Impact of NiCuZnnbsp;Ferrite Material on the Inductive Wireless Charging | p. 1462 |
| Effect of Annealing and Gate Insulator Material Changing on the Performances of IGZO-TFT | p. 1467 |
| A Unified Framework for the Evaluation of Complex Networks | p. 1473 |
| Highly Reliable Software Reliability Assessment Based on Statistics of Extremes and Bootstrapping Method | p. 1477 |
| Performance Improvement in the Pattern Classification of Nominal Data Sets Applying Multiple Correspondence Analysis | p. 1482 |
| Phase Image Segmentation and Filtering Algorithm Based on Direction of the Gradient Factor | p. 1488 |
| Research on Automatic Recognition of Separable Words in Modern Chinese | p. 1493 |
| The Attacking Dispersion Optimization in Multi Launch Rocket System Base-On Improved Genetic Algorithm | p. 1499 |
| Theory and Technology Research on the Software Health Management | p. 1503 |
| Research of Intrusion Detection System Object Oriented Modeling | p. 1507 |
| A Novel Influence Measure Algorithm for Social Networks | p. 1511 |
| Particle Swarm Algorithm Based on Boundary Buffering-Natural Evolution and its Application in Constrained Optimization | p. 1517 |
| Scheduling Jobs on Batch Machines Based on Ant Colony Algorithms | p. 1522 |
| Study of Wind Farm Power Output Predicting Model Based on Nonlinear Time Series | p. 1526 |
| The Construction of Biorthogonal High Dimensional Wavelet Packets | p. 1530 |
| Design and Implementation of Network Leave Examination and Approval System Based on CRP Digital Campus Information Management Platform | p. 1536 |
| Track Routing Optimization Model Based on Fuzzy Clustering Method | p. 1540 |
| Wind Power Prediction Based on Cloud Model and GMDH Two-Stage Optimization Approach | p. 1545 |
| Research and Implementation of Practical CAPP Database | p. 1550 |
| A Model of Competitive Hybrid Granularity Manufacturing Resource and its Unify Cloud Service Modeling | p. 1556 |
| Application Study on an Extended Design Pattern | p. 1562 |
| Study of Combined Forecast Model of Wind Power Output Based on GM-Weibull Wind Speed Distribution | p. 1566 |
| A Class of Hyperspace Systems and Distributional Chaos | p. 1570 |
| Maintenance Management: Rationale of TPM as the Research Focus | p. 1575 |
| The Rule of Law and Acquisitions and Risk Prevention in the Process of Cross-Border Mergers | p. 1583 |
| Common Statistic Technology Applied to the Product Quality Control | p. 1588 |
| Integrated Approach for Flexible Mixed Model Assembly Lines Balancing and Model Sequencing Problem | p. 1593 |
| Complex Adaptive Systems Integrating the Decision Making Process in Industrial Companies: A Scientific Conceptual Model | p. 1601 |
| The Difference of Physiological Indicators of Ground and Underground Subway Workers: A Preliminary Field Study | p. 1608 |
| Real Estate Abroad: How to Make the Right Choice | p. 1612 |
| Comparison of Chinese and American Product Injury Features | p. 1616 |
| Research on Life Cycle Environmental Property of Biomass Biodegradable Packaging Material | p. 1620 |
| Statistical Analysis as an Instrument for Improving the Quality of Products from Cellular Concrete | p. 1624 |
| Investigation of the Datamation of Manufacturing Industrial Chain in the Big Data Era | p. 1629 |
| Partner Selection of Agricultural Product Supply Chain Based on Discrete Particle Swarm Optimization Algorithm | p. 1633 |
| Applying Neuroscience to Tourism Management: A Primary Exploration of Neurotourism | p. 1637 |
| Shaping the Image of the Enterprise in the E-Commerce Network's Times | p. 1641 |
| The Study for Doubly Selective Channel Estimation Algorithm Based on Cluster Characteristics | p. 1645 |
| The Research of Peer-Reviewed Mode and Evaluation Standards Based on Online Published Papers | p. 1655 |
| Research on Context-Ware Technology in Ubiquitous Learning | p. 1659 |
| Application of the Operation Regulation Mode in the HVAC Engineering Teaching | p. 1663 |
| Competence Portfolio for Students of Physics and Engineering Majors | p. 1667 |
| Design of Digital Teaching Platform of the Internet of Things | p. 1671 |
| Education Quality Measured by the Classification of School Performance Using Quality Labels | p. 1675 |
Select a list
The following items were successfully added.
There was an error while adding the following items. Please try again.
One or more items could not be added because you are not logged in.